- Tungsten Crucibles[2]
- Tungsten Bars[1]
- Tungsten Sheets[6]
- Other Metals & Metal Products[6]
- Other Non-Metallic Minerals & Products[6]
- Other Non-Metallic Mineral Deposit[1]
- Other Lab Supplies[5]
- Laboratory Heating Equipments[6]
- Industrial Furnace[1]
- Other Machinery[1]
- Ceramics[1]
- Electrical Contacts and Contact Materials[4]
- Refrigeration & Heat Exchange Parts[6]
- Refractory[2]
- Other Home Appliance Parts[1]
- Other Electrical Equipment[1]
- Titanium Sheets[5]
- General Mechanical Components Stock[1]
- Contact Person : Ms. Huo Sunny
- Company Name : Zhengzhou Chida Tungsten & Molybdenum Products Co., Ltd.
- Tel : 86-371-67823000
- Fax : 86-371-67823288
- Address : Henan,Zhengzhou,No.2 Hangzhou Road
- Country/Region : China
- Zip : 450042
super MoSi2 heaters
Molybdenum disilicide (MoSi2) heating element is a resistance generate-heating component madefrom MoSi2 or the basic material. It has unique effect for resisting oxidization in the hightemperature. It is used to the highest temperature up to 1800 degreesduring oxidizing atmosphere.
* Dia. 3,4,6,7,9,10,12,18,24
* Temp: 1000-1800 celsius degrees
* Used in the industries of metallurgy, magnetic materials, glass, ceramic refractory, crystal electronic device,industrial furnace manufacture, lab furnace,Laboratory furnace,industry furnace,glass furnace,ceramic furnace etc..
MoSi2 Heating Element's installation: The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature. So you had better hang and erect vertically the "U"-shape element. If you need to erect it horizontally, please choose a support of high-temperature insulating materials. The cone-part of the element must extend inside the furnace. At first the fixture of MoSi2 power connector cant be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken.(our suggestion: please choose the specialize power connector provided by our company) The furnace top must be a good function of heat-preservation. In general, the temperature of furnace top cant be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick. The Dia.6 element cant be used of 170A for a long time. The Dia.9 element cant be used of 300A for a long time.
super MoSi2 heaters
